Cleaning the combiset
Before using for the first time clean the
appliance as follows:
^
Remove any protective foil.
^
Wash the removable parts of the gas
burner in a mild solution of warm
water and liquid dish soap.
^
Dry and reassemble the parts in the
correct order (see "Cleaning and
care").
^
Wipe down the stainless steel
combiset with a suitable cleaner and
dry thoroughly.
Metal components have a protective
coating which may give off a slight odor
the first time your new appliance is
heated.
The harmless odor will dissipate after a
short time and does not indicate a
faulty connection or appliance defect.
Before using the combiset
11
To Next Page
Loading...
