Cut out
^
Make the countertop cut-out for one
or more appliances as applicable.
Remember to maintain a minimum
safety distance from the back wall,
as well as from any tall unit or side
wall to the right or left of the hob.
See "IMPORTANT SAFETY
INSTRUCTIONS".
^
Seal the cut surfaces with a suitable
heat-resistant sealant to avoid
swelling caused by moisture.
The materials used must be
heat-resistant.
If during installation the seal around the
frame does not sit flush with the
countertop in the corners, the corner
radius, maximum
3
/
16
" (4 mm), can be
carefully filed down to fit.
Installation
27
To Next Page
Loading...
