Miele CS 1011 G - User Manual

Operating and installation instructions
Gas cooktops
CS 1011 G
To avoid the risk of accidents or
damage to the appliance, it is
essential to read these
instructions before it is installed
and used for the first time.
M.-Nr. 07 235 550
en - AU, NZ

Summary

Description of the appliance

Warning and safety instructions

Correct application

Defines the intended use of the appliance and lists restricted applications to ensure safety.

Safety with children

Provides essential guidelines for ensuring child safety when the appliance is in use.

Technical safety

Correct use

Before using for the first time

Operation

Rapid ignition system

Switching on, adjusting the flame and switching off

Safety features

Thermo-electric ignition

Safety switch-off

Problem solving guide

Burner ignition issues

Troubleshooting steps for when the burner fails to ignite or after long periods of disuse.

Indicator flashing

Troubleshooting steps for flashing indicators, possibly related to power interruptions.

Flame appearance;extinguishing

Advice for addressing changes in flame appearance or flame going out during operation.

Ignitor not sparking

Troubleshooting steps for issues where the burner ignitor does not produce a spark.

Safety instructions for installation

Safety clearances

Clearance above the cooktop

Side and rear clearances

Appliance and building-in dimensions

Preparing the worktop

Installation of several appliances

Worktop cut-out - two appliances

Worktop cut-out - three appliances

Fixing the spring clamps and spacer bars

Installing; removing the appliance(s)

Installing the appliance

Removing the appliance

General installation tips

Electrical connection

Gas connection

Natural gas; liquid gas connection

Conversion to another type of gas

Changing the jets

Comprehensive instructions for replacing the appliance's gas jets for different gas types.

To change the main jet

Specific instructions for replacing the main jet.

To change the jet for the inner burner

Detailed steps for changing the gas jet specific to the inner burner.

Checking the first intake of air

Procedure for checking air intake after conversion.

To change the small jets

Instructions on how to replace the smaller gas jets on the appliance.

Checking operation

Procedures to verify correct and safe operation after converting to a different gas type.

Miele CS 1011 G Specifications