Stainless steel surfaces
Clean stainless steel surfaces using an
Original Miele all purpose microfibre
cloth or with a solution of warm water
and a little washing-up liquid applied
with a soft sponge. In the case of
stubborn dried-on soiling, soak first.
Finally, dry with a soft cloth.
The Original Miele ceramic and
stainless steel cooktop cleaner can be
used to clean the frame when required
(see "Optional accessories"). Apply with
an even pressure following the direction
of the "grain".
The Original Miele care product for
stainless steel can be used after
cleaning to help keep your appliance
looking good and to hinder resoiling
(see "Optional accessories").
Apply sparingly with a soft cloth
following the instructions on the
packaging.
Printed surfaces (Flame symbols)
The printing can be damaged if
soiling (e.g. food or fluids that
contained salt, olive oil) is not
removed immediately. Remove any
soiling immediately.
Do not use any stainless steel
cleaner on printed surfaces. This
would rub off the print.
Pan support, control knob
Do not clean the pan support in a
dishwasher.
Remove the pan support. Clean the
pan support and the control knob with a
solution of warm water and a little
washing-up liquid applied with a soft
sponge. Stubborn soiling should be
soaked first.
After cleaning, dry all surfaces with a
clean cloth.
Cleaning and care
24
To Next Page
Loading...
Need help?
General
