Miele CVA 2650 - Frothing Milk into the Cup; Frothing Milk in the Cappuccinatore

Frothing milk into the cup
^
Fill the cappuccinatore to the upper
"max" mark with cold milk.
^
Turn the spout to the cup symbol.
^
Turn the valve over the handle to the
froth symbol.
^ Place the cappuccinatore under the
steam valve.
^ Press the steam lever, a, down and
"connect" the valve with the
cappuccinatore, b.
Ensure that the valve engages
properly in the lower position.
Milk is frothed by the hot steam and
dispensed into the cup.
^
Turn the cappuccinatore valve to
regulate the froth.
^
Push the steam lever up when
enough froth is prepared.
The steam supply is temporary. If the
steam stops and there is not enough
froth prepared, push the steam lever
up then down again.
Frothing milk in the cappuccinatore
^
Fill the cappuccinatore up to the
lower "max" mark with cold milk.
^
Turn the spout to the cappuccinatore
symbol.
^
Turn the valve over the handle to the
froth symbol.
HEATING WITH STEAM
K12345
L
on
G
k C
^
Turn the left jog shuttle to "Heating
with steam".
^ Place the cappuccinatore under the
steam valve.
^
Press the steam lever, a, down to
connect the valve with the
cappuccinatore, b.
Ensure that the valve engages
properly in the lower position.
The milk will be frothed in the
cappuccinatore.
^
Push the steam lever up when the
milk is frothed to the desired degree.
Making coffee
21
www.dexpress.com Page 30 of 105 12/31/2010
www.dexpress.com Page 30 of 105 12/31/2010
CVA2650
CVA2650
Mfr Sup
Mfr Sup