The coffee system comes equipped
with a 6 ft. (1.8 m) power cord with a
NEMA 5-15P molded plug for
connection to a 120 V, 15 A, 60 Hz
power supply.
Connection should be made via a
suitable isolator, with an on-off switch
which should be easily accessible for
servicing work.
Installation, repairs and other work by
unqualified persons could be
dangerous. The manufacturer cannot
be held responsible for unauthorized
work.
Verify that the voltage, load and circuit
rating information found on the data
plate match that of the household
electrical supply before installing the
coffee system.
If there is any question concerning the
electrical connection of this appliance
to your power supply, please consult a
licensed electrician or call Miele’s
Technical Service Department.
U 1-800-999-1360
V 1-800-565-6535
Electrical connection
56
www.dexpress.com Page 4 of 105 12/31/2010
www.dexpress.com Page 4 of 105 12/31/2010
CVA2650
CVA2650
Cond Inst
Cond Inst
To Next Page
Loading...
Need help?
General
