The right display will prompt you
through the single steps of the
descaling process.
Follow these prompts.
See "Descaling prompts" for more
information.
Do not skip any steps and do not
remove a part unless prompted by
the display. This will cause the
program to fault and descaling will
restart.
At the beginning of the descaling
program there will be a delayed start to
allow the tablets to completely dissolve.
If the machine has not sufficiently
cooled after use to begin the descaling
program the delay start time will be
extended.
A pump will introduce a small amount
of descaling solution into the system
then rest briefly to allow the solution to
take effect. The right display indicates
how long the process will take.
Descaling the appliance
44
www.dexpress.com Page 53 of 105 12/31/2010
www.dexpress.com Page 53 of 105 12/31/2010
CVA2650
CVA2650
Mfr Sup
Mfr Sup
To Next Page
Loading...
