– If the exhaust is ducted into an
inactive flue, the air must be expelled
parallel to the flow direction of the
flue.
Never connect an exhaust hood to
an active chimney, dryer vent, flue,
or room venting ductwork. Seek
professional advice before
connecting an exhaust hood vent to
an existing, inactive chimney or vent
flue.
Important
If the ductwork runs through rooms,
ceilings, garages, etc. where
temperature variations exist, it may
need to be insulated to reduce
condensation.
Condensate trap
In some cases, a condensate trap may
also be required to collect and
evaporate any condensate which may
occur.
^
When installing a condensate trap,
ensure that it is positioned vertically
and if possible directly above the
exhaust outlet.
Air extraction
34
www.dexpress.com Page 93 of 105 12/31/2010
www.dexpress.com Page 93 of 105 12/31/2010
DA3190
DA3190
Cond Inst
Cond Inst
To Next Page
Loading...
