Before preparing the first drink
Filling the system with water
The machine is emptied completely before it leaves the
factory. You must allow water to be pumped through the
system before the first drink of coffee or hot water is
prepared.
Hot water
K1 K2 K3 K4 K5 L o n G k C
^
Select "Hot water" with one of the arrow sensors.
^
Touch the OK sensor.
^ Run some hot water into the cup.
^ Touch the OK sensor again to switch the water off.
The system is now filled with water, and the machine is ready
to use.
Espresso or Coffee
^ Place a cup under the spout.
COSI o Espresso
K1 K2 K3 K4 K5 L onG k C
^
Select the type of coffee with one of the arrow sensors.
^
Use the drink selection sensor to select espresso or coffee.
The type of coffee you have chosen will appear in the top
line of the display on the right.
^
Touch the OK sensor once.
The drink you want will then run out of the spout.
Making coffee
20
To Next Page
Loading...
