The volume of water programmed in will now be dispensed
every time this drink (coffee or espresso) is selected,
regardless of the coffee chamber selected.
Water flow stops automatically when the maximum amount
possible is reached. This amount is then memorised for
the drink.
Programming the amount via "Settings"
^
Place the appropriate cup for the amount you want to
programme under the coffee spout.
^
Use the arrow sensors to select "Settings" and touch the
OK sensor.
Both coffee and espresso will appear in the display. You can
set the quantity of water dispensed for both these drinks.
^ Select the type of drink (coffee or espresso) with the arrow
sensors and touch the OK sensor.
^ Now select the type of coffee you want to drink now and
touch the OK sensor. (If the OK sensor does not react, the
chamber for the type of coffee is empty).
^ Select "Start".
^ When the cup is filled to the level you want, touch the OK
sensor.
The portion size for this particular drink is now set and stored
in memory. The volume of water programmed will now be
dispensed every time this drink (coffee or espresso) is
selected, regardless of the coffee chamber selected.
Programming the amount (Setting the portion sizes)
51
To Next Page
Loading...
