The steam valve must engage in the lower position in
order to connect properly with the cappuccinatore.
^
When you have sufficient froth push the steam valve
upwards again.
Hot milk
^ Turn the valve on the cappuccinatore anti-clockwise as far
as it will go.
^ Fill the cappuccinatore up to the upper marker with cold
milk and replace the lid.
^ Push the milk spout in as far as it will go (for frothing hot
milk to be dispensed into a cup) or pull the milk spout out
(for frothing hot milk in the cappuccinatore jug) and place
the cappuccinatore in the insert of the drip tray.
^
Press the steam valve slowly downwards to connect it to
the cappuccinatore.
Frothing milk in the cappuccinatore jug gives you
hotter milk.
After preparing milk / Interim cleaning
If you want to use the cappuccinatore again
before cleaning it thoroughly, e.g. because there
is some milk left in the cappuccinatore, you can
use the coffee machine to rinse the lid. This will remove any
milk deposits.
Carrying out the rinsing programme is not a substitute for
cleaning it thoroughly in the dishwasher.
Making coffee
25
To Next Page
Loading...
