Miele CVA 6405 - Selecting a Profile; Changing the Name; Deleting a Profile

Selecting a profile
This selection is only possible if you
have already created a profile in
addition to the standard Miele profile.
^
Touch the arrow until "Select profile"
is highlighted. Touch the OK sensor.
^
Use the arrow sensors to select the
profile you want. Touch the OK
sensor.
The name of the current profile is
shown in the top left of the display.
Changing the name
This selection is only possible if you
have already created a profile in
addition to the standard Miele profile.
^ Touch the arrows until "Change
name" is highlighted in the display.
Touch the OK sensor.
Now proceed as described in "Creating
a profile".
–
to delete a character, select #,
–
to enter new characters, select the
relevant character and confirm with
OK,
–
to save the altered name, select (
and touch the OK sensor.
Deleting a profile
This selection is only possible if you
have already created a profile in
addition to the standard Miele profile.
^
Touch the arrow sensors until "Delete
profile" is highlighted. Touch the OK
sensor.
^
Use the arrow sensors to select the
profile you want to delete.
^
Touch the OK sensor.
A tick ( will appear beside the profile
and after a short while the profile will be
deleted.
Setting up profiles
39