Central spout
Clean the stainless steel cover of the
central spout by hand only using hot
water and a little washing-up liquid. All
other parts are dishwasher safe.
^
Pull the central spout down as far as
it will go a, and pull the cover
forwards to remove it b.
^
Press catch a upwards slightly,
grasp the dispensing unit by the
handle und pull this forwards and off
b.
^
Hold the magnets at the side and pull
forwards to release the unit.
^
Turn upper connecting piece a and
pull it upwards to remove it. Remove
lower connecting piece b in the
same way.
^
Pull off dispensers c.
The Y-piece connnector must not be
removed.
^
Clean all parts thoroughly.
Cleaning and care
54
To Next Page
Loading...
Need help?
General
