a
The front section of the wall housing unit must be fitted with a shelf to the
depth of t
he partition wall. If the appliance is fitted further back, e.g. to
accommodate a front panel, then the shelf depth should be correspondingly
deeper.
b
The partition wall in the wall unit must be removable.
c
Extraction mode: the height of the wall unit and cut-out dimensions must take
acco
unt of any accessories fitted, e.g. silencer, DSM module.
d
Recirculation mode requires conversion kit DUU 151.
e
DSM 400 accessory
To Next Page
Loading...
