Operation: Combination cooking mode
42
Sequence of an automatic
programme
Up until the start time the function, the
selected temperature and moisture
level, Start at and the start time will
appear in the display.
After the start time you can see the
temperature increasing in the display
during the heating-up phase until the
set temperature is reached. Once this
temperature is reached a tone will
sound.
After the heating-up phase you can
follow the time counting down in the
display. The last minute counts down in
seconds.
At the end of the programme the
steam generator and oven
compartment lighting will switch off. A
tone or a melody will sound (see
"Settings - Acoustic tones").
Steam reduction (only with temperatures
of approx. 80-100°C and 100%
moisture) and Prog. finished will appear
in the display.
You have the option of saving your
settings as a User programme (see
"User programmes") or increasing the
cooking duration via .
Changing settings during a
programme
Touch .
The following will appear in the display:
– all individual cooking stages
– Add cooking stage
You can change the specified settings
for a cooking stage or add more
cooking stages to the programme.
Scroll through the list until the
cooking stage you want or Add
cooking stage is highlighted in the
display.
Confirm with OK.
Alter the cooking stages as you wish
(see "Simple operation") and confirm
with OK.
A summary of your settings will appear
in the display.
Check the settings and confirm with
OK.
Cancelling cooking
Turn the function selector to •.
Select function will appear in the display.
Any cooking durations set are deleted.
To Next Page
Loading...
Need help?
General
