Need help?Do you have a question about the Miele DGC 6 Series and is the answer not in the manual?
Essential safety precautions for qualified technicians during appliance service.
Records of changes, updates, and compilations made to the technical documentation.
Detailed technical specifications including dimensions, capacity, and electrical connections for different models.
Location of the optical interface for diagnostic support and program updating.
Identification and listing of electrical components found on the top of the appliance.
Explanation of the door contact switch function and its interaction with appliance operation.
Troubleshooting steps for a scratched CleanSteel surface, including cause and remedy.
Step-by-step guide for servicing the appliance, starting with removal from housing.
Detailed instructions for door removal, disassembly, and assembly processes.
Technical data related to cavity components like heater elements and oven lights.
Explanation of the heat-flow temperature sensor and its role in cavity temperature measurement.
Troubleshooting common cavity issues such as scratches, noisy operation, and rust.
Step-by-step guides for removing and replacing cavity components like heating elements.
Technical specifications for components like air flap motor, cavity temp sensor, steam generator, and fans.
Explanation of the function of the cavity temperature sensor, steam generator, and pinch/drain valve.
Troubleshooting common faults related to knocking noises, residual water, and kinked hoses.
Procedures for removing components such as the air flap motor, cavity sensor, drain pump, and steam generator.
Technical data for the lift motor, essential for understanding the drive system.
Explanation of the fascia panel operation, water tank sensors, and water tank filling.
Troubleshooting common faults with the fascia panel, such as not opening or closing correctly.
Technical data for cooling fan, heat-flow fan, feed pump, and inlet valves.
Explanation of the feed pump, water intake, and steam reduction functions.
Troubleshooting fault codes related to temperature sensors, communication, and software issues.
Procedures for removing components like cooling fan, heat-flow fan, feed pump, and power electronic.
Explanation of the optical interface and the M-Touch display operation.
Troubleshooting fault codes related to temperature sensors, communication, and software.
Guide to accessing settings menus, programming modes, and service modes.
Procedure to resolve drain faults (F10, F11) related to the pinch valve and hose binding.
Information regarding missing mounting screws for the trim kit on early XXL models.
Notes on interchangeable electronics and software uploading for Gen6 M-Touch appliances.
To Next Page
General
