For a side-by-side combination the filler
strips from both appliances are put
together to form one long filler strip:
^
Take the peg from the "side-by-side
merging kit" and insert it halfway into
the filler strip rail on the left-side
appliance.
^ Place the second filler strip on the
peg and press both filler strips
together.
^ Insert both filler strips into the
installation space above the
appliance, until they click into place.
^
Open the appliance door.
^ Screw the attachment plate lugs m to
the adjacent furniture/fixtures.
If a side-by-side installation is desired,
connect the two appliances together.
See the Installation Manual included
with the "Merging Kit".
Now connect the water supply to the
appliance (see "Plumbing").
Installing the appliance
67
To Next Page
Loading...
