Miele FNS 28463 E ed/cs - Setting the Time before the Door Alarm  Is Triggered; Switching the Sensor Tone  on; off; Setting the Volume;Switching Alarms and Audible Tones  On;Off

Selecting further settings
37
Setting the time before the door
alarm

is triggered
The refrigeration appliance has a door
alarm. If a door is open for a longer
period of time an alarm will sound (if
this has not been switched off: see
“Setting the volume/Switching alarms
and audible tones on/off”) and

will
light up in the display (see “Temperature
and door alarm – Door alarm”).
You can set the time before the door
alarm

sounds with the segment bar:
The time can be set in 30-second
increments, starting with 30seconds
(level 1=1filled-in segment) up to a
maximum of 3minutes 30seconds
(level7=7filled-in segments).
Switching the sensor tone

on /
off

Every time a selectable field is touched
a sensor tone sounds. You can switch
this on

or off

.
Setting the volume/Switching alarms
and audible tones on/off
You can set the volume of the alarms
and audible tones in the segment bar:
If all segments are filled in, the
maximum volume is set.
If no segments are filled in, the alarm
and audible tones are switched off. 
appears.
You will hear the volume change as it is
adjusted.
Alarms and audible tones for
temperature alarms, error messages,
interruptions to the power supply or a
set minute minder cannot be switched
off.