Miele G 4263 VI Active User Manual

Operation
46
Interrupting a programme
A programme is interrupted as soon as
the door is opened.
If the door is closed again, the pro-
gramme will continue from the point it
was at before the door was opened.
 Water in the dishwasher may be
hot. Danger of scalding.
Only open the door if absolutely ne-
cessary and exercise extreme cau-
tion when doing so. Before closing
the door again, leave it ajar for ap-
prox. 20 seconds. This will enable
the temperature in the wash cabinet
to settle. Then raise the door up and
push until the catch engages.
Changing a programme
If the detergent dispenser flap has
already opened, do not change the
programme.
If a programme has already started and
you wish to change it, proceed as fol-
lows:
 Open the door.
 Switch the dishwasher off with the 
button.
 Switch the dishwasher on again with
the  button.
 Select the programme you want.
 Start the programme by closing the
door.

Miele G 4263 VI Active Specifications

General

Appliance placement	Built-in
Noise Level	46 dB
Control Type	Electronic
Turbothermic drying	No
Number of washing programs	5
AquaStop function	Yes
Delayed start timer	Yes
Delay start (max)	24 hours
Delay start	Yes
Child lock	Yes
Weight	45 kg
Number of Place Settings	13
Product size	Full-size
Dimensions (H x W x D)	805 x 598 x 570 mm