Miele G 4263 VI Active User Manual

Problem solving guide
65
Most minor faults in the performance of the appliance, some of which may result
from incorrect operation, can be put right without contacting the Service Depart-
ment.
The following guide may help you to find the reason for a fault, and to correct it.
You should, however, note the following:
 Unauthorised or incorrect repairs could cause personal injury or damage to
the appliance.
Repair work to electrical appliances must only be carried out by a suitably qual-
ified and trained person in strict accordance with current local and national
safety regulations. The manufacturer cannot be held liable for unauthorised
work.
Technical problems
Problem Cause and remedy
The dishwasher will not
start.
The door is not properly closed.
 Push the door firmly shut.
The appliance is not plugged in.
 Insert the plug and switch on at the socket.
The mains fuse has tripped.
 Reset the trip switch in the mains fuse box or re-
place the fuse in the plug (minimum fuse rating -
see data plate).
The dishwasher is not switched on.
 Switch the dishwasher on with the  button.
The dishwasher stops
during a programme.
The mains fuse has tripped.
 Reset the trip switch in the mains fuse box or re-
place the fuse in the plug (minimum fuse rating -
see data plate).
 If the mains fuse trips again, call the Miele Service
Department.

Miele G 4263 VI Active Specifications

General

Appliance placement	Built-in
Noise Level	46 dB
Control Type	Electronic
Turbothermic drying	No
Number of washing programs	5
AquaStop function	Yes
Delayed start timer	Yes
Delay start (max)	24 hours
Delay start	Yes
Child lock	Yes
Weight	45 kg
Number of Place Settings	13
Product size	Full-size
Dimensions (H x W x D)	805 x 598 x 570 mm