Miele G 4263 VI Active User Manual

Problem solving guide
69
General problems
Problem Cause and remedy
Detergent residue is left
in the dispenser at the
end of a programme.
The dispenser was still damp when detergent was ad-
ded.
 Make sure the dispenser is dry before adding de-
tergent.
The detergent dis-
penser lid cannot be
closed properly.
Clogged detergent residue is blocking the catch.
 Clean the detergent from the catch.
At the end of a pro-
gramme there is a film
of moisture on the in-
side of the door and the
interior cabinet walls.
This is caused by the drying system and does not in-
dicate a fault. The moisture will dissipate after a
while.
Water remains in the
wash cabinet at the end
of a programme.
Before rectifying the problem:
 Switch the dishwasher off with the  button.
The filter combination in the wash cabinet is clogged.
 Clean the filter combination (see "Cleaning and
care, Cleaning the filters").
The drain pump or non-return valve may be blocked.
 Clean the drain pump or the non-return valve (see
"Maintenance").
The drain hose is kinked.
 Remove any kink from the drain hose.

Miele G 4263 VI Active Specifications

General

Appliance placement	Built-in
Noise Level	46 dB
Control Type	Electronic
Turbothermic drying	No
Number of washing programs	5
AquaStop function	Yes
Delayed start timer	Yes
Delay start (max)	24 hours
Delay start	Yes
Child lock	Yes
Weight	45 kg
Number of Place Settings	13
Product size	Full-size
Dimensions (H x W x D)	805 x 598 x 570 mm