Programme options
53
Factory default
If you have altered any settings from
the fact
ory default, you can re-set them
back to the factory default settings.
Switch the dishwasher off with the
butt
on, if it is switched on.
P
ress the Start button in and whilst
holding it in switch the dishwasher
on using the On button
Keep the Start button pressed in for
at least four seconds until the Start
indicator light comes on.
If this does not happen, start the proce‐
dur
e from the beginning again.
P
ress the button 19 times.
The
indicator will do 1 long flash and
9 short flashes at intervals.
The flashing sequence in the display in‐
dica
tes whether a setting has been
changed from its factory default.
– : All setting
s are set to factory de‐
fault settings.
– : A
t least one setting has been
changed.
T
o reset the dishwasher to the factory
default settings, press the Start but‐
ton.
The setting is now stored in memory.
Switch the dishwasher off with the
butt
on.
To Next Page
Loading...
