Programme options
50
Adjust Sensor wash
You can adjust the Sensor wash pr
o‐
gramme so that it will remove stubborn
soiling in a lightly soiled load.
Switch the dishwasher off with the
butt
on, if it is switched on.
P
ress the Start button in and whilst
holding it in switch the dishwasher
on using the On button
Keep the Start button pressed in for
at least four seconds until the Start
indicator light comes on.
If this does not happen, start the proce‐
dur
e from the beginning again.
P
ress the button 5 times.
The
indicator will flash rapidly 5
times at intervals.
The flashing sequence in the display in‐
dica
tes whether Adjust sensor wash is
activated or not.
– : "Ad
just sensor wash" activated
– : "Adjust sensor wash" switched
off
P
ress the Start button to change the
setting.
The setting is now stored in memory.
Switch the dishwasher off with the
butt
on.
To Next Page
