Problem solving guide
64
Problem Cause and remedy
The Inle
t/Drain and
Rinse aid indicators are
flashing at the same
time.
Fault number is
showing in the display.
There may be a technical fault.
Switch the dishwasher off with the b
utton.
Switch the dishwasher back on aft
er a few sec‐
onds.
Selec
t the programme you want.
P
ress the Start button.
If the indicator lights flash again, there is a technical
fault.
C
all the Miele Service Department.
Fault :
The dr
ain pump is still
running, even with the
door open.
The Waterproof system has reacted.
Cl
ose the stopcock.
C
all the Miele Service Department.
Fault : A fault has occurred in the circulation pump.
Switch the dishwasher off for at least 30 seconds
with the b
utton.
Switch the dishwasher back on.
If the fault message appears again, there is a techni‐
cal fault.
C
all the Miele Service Department.
To Next Page
Loading...
