The display changes to the program menu.
^
Select Start.
^
Close the door.
The program starts automatically at the selected time.
The indicator , goes out.
A few minutes after the last key press, the dishwasher will
switch into standby mode to save energy. The display and
the indicators will turn off.
Starting a program before the delay start has elapsed:
A program can be started before the delay start time has
elapsed.
^ Open the door.
^ Select Cancel and confirm with OK.
The d indicator lights.
Sensor Wash
12:00
Program finished
Main menu }
^ Select Main menu.
^
Select the desired program.
^
Select Start.
^
To start the program, close the door.
The optical interface lights to indicate that a program is
running.
Additional options
45
To Next Page
Loading...
