Save options
Additional options can be selected for
some programs, e.g. extended drying.
See "Use - Selecting options".
Save options allows you to save the
selected options for future use of the
program.
This function is turned off by default.
^
Select the desired setting and
confirm with OK.
Temperature
The temperature can be displayed in
"°C/Celsius" or "°F/Fahrenheit".
The temperatures are shown in
°C/Celsius by default.
^ Select the desired temperature unit
and confirm with OK.
Buzzer
When the buzzer is activated, a tone
sounds at the end of a program and if a
fault occurs.
The buzzer at the end of a program is
turned on by default.
Buzzer at the end of a program
The buzzer at the end of a program
sounds five times in intervals with a
brief break in between. The buzzer
sounds up to one hour if the
dishwasher in not turned off.
Buzzer in case of a fault
The buzzer for a fault sounds
continuously. The buzzer sounds up to
two minutes if the dishwasher is not
turned off or the fault is fixed.
The buzzer for a fault cannot be set
to off.
Buzzer tone
The buzzer volume can be set to 17
different levels.
The buzzer cannot be turned off in
case of a fault.
^
Select the desired volume.
^
Confirm with
OK.
Settings !
53
To Next Page
