Miele G 6300 - At the end of the programme

Operation
52
Energy management
To save energy, the dishwasher will
switch off aut
omatically a few minutes
after the last time a button has been
pressed or after the end of a pro‐
gramme.
 P
ress the  button to switch the
dishwasher back on.
The dishwasher will not switch off auto‐
matically if the time of day display has
been activat
ed (see "Settings menu -
Time of day").
The dishwasher will not switch off
whilst a pr
ogramme or the FlexiTimer
is running or if there is a fault.
At the end of the programme
The programme has finished when 
Finished appears in the display and the
door has opened slightly (if applicable).
If the Consumption programmable func‐
tion is switched on, you can now call up
the actual energy and water consump‐
tion of the programme which has just
finished (see "Caring for the environ‐
ment - EcoFeedback consumption indi‐
cator").
The drying fan may continue to run for
a few minut
es at the end of the pro‐
gramme.
 Open the door fully so that the door
catch
rail retracts again.
You can now empty the dishwasher.
 I
f you have deactivated the auto‐
matic door opening function (see
"Settings menu - AutoOpen"), but
would still like to open the door at
the end of the programme, then
make sure that you open the door
fully.
Otherwise steam from the dishwash‐
er could damage the edge of the
workt
op because the fan is no longer
running.