Water connection
85
The Miele Waterproof system
As long as your dishwasher has been
instal
led correctly, the Miele waterproof
anti-leak system will protect you from
water damage.
Connection to the water sup‐
ply
W
ater in the dishwasher must
not be used as drinking water.
IMPOR
TANT Australia and New
Zealand
This appliance must be installed ac‐
cording to AS/NZS 3500.1. Back
flow prevention is already integrated
in the appliance.
– The dishwasher may be connected to
a col
d or hot water supply, max.
60 °C.
We would only recommend connec‐
tion to a hot water supply if it is eco‐
nomical, e.g. a solar powered supply.
When connected to a hot water sup‐
ply, all programme stages which
would otherwise be carried out with
cold water will be carried out with hot
water.
– The SolarSave pr
ogramme (if availa‐
ble) requires a hot water supply of
between 45°C (minimum) and 60°C
(maximum).
The higher the water intake tempera‐
ture, the better the cleaning and dry‐
ing results.
To Next Page
Loading...
