Miele G 6300 - FlexiTimer with EcoStart

Programme options
56
FlexiTimer with EcoStart
The FlexiTimer  gi
ves you three ways
of starting the programme by means of
delaying the start. You can set the start
time or the finish time of a programme.
You also have the option of taking ad‐
vantage of time variable economy rates
of electricity using the EcoStart function.
When using the Delay start function,
mak
e sure that the detergent com‐
partment is dry before adding deter‐
gent. Wipe dry with a cloth if neces‐
sary. If the compartment is wet,
powder detergent can become lum‐
py and stick to the dispenser, with
the result that it is not fully dis‐
pensed.
Do not use liquid detergent when se‐
lecting Delay start, as it can run into
the dishwasher before it is required.
 T
o prevent children coming into
contact with dishwasher detergent:
Do not fill the detergent dispenser
until
just before starting the pro‐
gramme, i.e. before you activate the
FlexiTimer with
OK. Als
o activate the
door safety lock.
 Switch the dishwasher on with the 
butt
on.
The Start indica
tor light will flash.
 Selec
t the programme you want.
 Press the  button.
You can use the  arr
ow buttons to
select the Start at, Finish at, or EcoStart
function or Back .
 Confirm selection of the function you
want with OK.
The current time of day will appear and
the hour number block will be highligh‐
t
ed.
You can now enter the time you want
using the 
arrow buttons and con‐
firm with
OK.
If, while you are setting the time, you do
not pr
ess any buttons for several sec‐
onds, the display will revert to the previ‐
ous menu. You will then have to enter
your settings again.
If the time of day (clock) display has
been switched off (see "Settings menu
- T
ime of day"), the display will go out
after a few minutes and only the
Start
indicat
or light will flash slowly.
Press any button to switch the display
back on aga
in for a few minutes.