Programme options
57
Start at
With the Start at function, you set the
e
xact time at which you want the pro‐
gramme to start.
Use the arr
ow buttons to set the
hour and confirm with
OK.
The hours will be saved and the minute
number block will
be highlighted.
Use the arr
ow buttons to set the
minutes and confirm with
OK.
The saved start time for the programme
select
ed will appear in the display.
The
Start indica
tor light will come on.
When the set time is reached, the pro‐
gramme selected will start automatical‐
ly.
The time remaining will appear in the
display, the indicator light will go out
and the
Start indicat
or light will light up.
Finish at
With the Finish at function, you set the
time at which you wish the pr
ogramme
to end.
Use the arr
ow buttons to set the
hour and confirm with
OK.
The hours will be saved and the minute
number block will
be highlighted.
Use the arr
ow buttons to set the
minutes and confirm with
OK.
The estimated start time for the pro‐
gr
amme selected will appear in the dis‐
play.
The
Start indicator light will come on.
A message will appear in the display if
the pr
ogramme cannot be completed
by the set finish time because it has too
long a running time.
When the estimated time is reached,
the pr
ogramme selected will start auto‐
matically.
The time remaining will appear in the
display, the indicator light will go out
and the
Start indicat
or light will light up.
To Next Page
