Programme options
58
EcoStart
The EcoStart function
allows you to take
advantage of time variable economy
rates of electricity. Before you can use
this option, you must set up to three
electricity tariff time zones (see "Set‐
tings - EcoStart").
You then set the latest time at which the
programme selected should end.
The dishwasher will start automatically
in the cheapest tariff zone within the
time set.
Use the arr
ow buttons to set the
hour and confirm with
OK.
The hours will be saved and the minute
number block will
be highlighted.
Use the arr
ow buttons to set the
minutes and confirm with
OK.
The estimated start time of the pro‐
gr
amme selected will appear in the dis‐
play.
The and
Start indicat
or lights will
light up.
The programme selected will start auto‐
matically in the cheapest time zone and
will fini
sh at the latest at the finish time
set.
The time remaining will appear in the
display, the indicator light will go out
and the indicator light for the pro‐
gramme selected will light up.
Changing or deleting set times
You can change the set times or the
pr
ogramme before the start time in the
display is reached.
P
ress the button.
Use the arr
ow buttons to select
the setting you want to change and
confirm with
OK.
Use the arr
ow buttons to select
the Change or Delete function and
confirm with
OK.
After confirming the Change function,
you can change the set time.
After confirming the Delete function, the
pr
ogramme duration will appear in the
display and the programme will start.
The indicator light will go out and the
Start indicat
or light will light up.
To Next Page
