Miele G 7100 SCI - Page 22

Before using for the first time
22
Finally, prompts will appear in the dis-
play.
After confirming these prompts with
OK, the messagesRefill salt and
Refill rinse aid may appear.
 Add salt and rinse aid if necessary
(see the “Before using for the first
time” chapter, “Dishwasher salt” and
“Rinse aid” sections).
 Select OK to confirm the messages.
The programme selected will briefly ap-
pear in the display and the indicator
light for the programme selected will
come on.
Next, the estimated energy and water
consumption may be shown for the
chosen programme for several
seconds.
Then the display will show the estim-
ated duration for the programme selec-
ted.
You can now turn on the Hygiene
cycle function (see the “Settings”
chapter, “Hygiene cycle” section).