Miele G 7100 SCI - Options; Timer; Activating the Timer

Options
52
Timer
You can set the start time of a pro-
gramme, e.g. to benefit from cheaper
energy tariffs at night. The programme
start time can be delayed for between
30minutes and 24hours.
With start time delays between
30minutes and 9hours 30minutes, the
delay can be set in 30minute stages. It
is set in hours for periods longer than
this.
During manual detergent dispensing
the detergent will clump together if
the detergent compartment is not
dry, and this may mean it is not fully
rinsed out.
When using the timer function, make
sure that the detergent compartment
is dry before adding detergent. Wipe
dry with a cloth first, if necessary.
Do not use any liquid detergents.
These can leak out.
 Danger to health due to deter-
gent.
To prevent children coming into con-
tact with dishwasher detergent:
Do not fill the detergent dispenser
until just before starting the pro-
gramme, i.e. before you activate the
timer. Use the safety lock to secure
the dishwasher door.
Activating the timer
 Switch the dishwasher on with the
button.
The Start indicator light will flash.
 Select the programme you want.
 Press the Timer button.
The “Start in” time that was last set as
the delay start period will appear in the
display. The Timer indicator light will
light up.
 Set the required delay start period us-
ing the buttons.
If the button is pressed and held, the
time will increase automatically up to
hours.
 Confirm with OK.
The Start indicator light will come on.