Miele G 7100 SCI - Rinse Aid; Consumption (EcoFeedback); Display Consumption; Display Total Consumption

Settings
99
Rinse aid
You can adjust the rinse aid dosage for
best results.
The rinse aid dosage can be set from 0
to 6ml.
3ml is the factory default setting.
The rinse aid dosage can turn out to be
higher than the set value due to the
automatic adjustment of the pro-
gramme.
If spots appear on crockery and glass-
ware:
– Increase the rinse aid dosage.
If clouding or smearing appears on
crockery and glassware:
– Decrease the rinse aid dosage.
Consumption (EcoFeedback)
You can set whether the energy and
water consumption is displayed for the
selected programme. This function
shows the estimated consumption be-
fore a programme, and the actual con-
sumption after the end of the pro-
gramme.
In this menu you can also call up the
total consumption of energy and water
for all the wash programmes you have
previously run on your dishwasher (see
“Caring for the environment” chapter,
“EcoFeedback consumption ”display
section).
Display Consumption
 Select the Consumption displaymenu
option and confirm with OK.
 Select the setting you want and con-
firm with OK.
Display Total consumption
 Select the Total consumptionmenu op-
tion and confirm with OK.
 You can display the values for Energy
and Water using the buttons.
You can also reset the values for the
total consumption to 0.
 Select the Resetmenu option and
confirm with OK.
 Select the Yesmenu option and con-
firm with OK.
 Confirm the message with OK.
The values are now reset to 0.