Miele G 7100 SCI - Page 53

Options
53
After you have activated the timer, all
the displays will switch off after a few
minutes to save energy.
Press the button to switch the dis-
play back on again for a few minutes.
The time up until the programme starts
will show counting down in the display
in hours for durations above 10hours,
and in minutes for durations below this.
At the end of the delay period, the pro-
gramme selected begins automatically.
The time remaining will appear in the
display, the Timer indicator light will
go out.
How the delay start period is shown
in the display:
up to 59minutes:
e.g. 30minutes=:
1hour up to 9hours 30minutes:
e.g.5 hours=:
over 10hours:
e.g. 15hours=
Starting a programme before the
delay start period has elapsed:
A programme can be started before the
delay start period has elapsed.
Proceed as follows:
 Switch the dishwasher off with the
button.
 Switch the dishwasher on again with
the button.
 Select the programme you want.
 Press the Startbutton.
The programme starts. The Start indic-
ator light will come on.