Settings
36
2nd interim rinse
You can choose this function to in-
crease the cleaning performance of the
programmes with a second interim
rinse.
When this function is activated, water
consumption may increase.
If this function is switched on, it will be
applied to all programmes until it is
switched off again (except for the ECO
programme).
Hygiene cycle
If you mainly use low temperature pro-
grammes (<50°C), there is a risk of
bacteria and unpleasant odours build-
ing up in the wash cabinet (see “Clean-
ing and care – Hygiene cycle”).
If this function is switched on, a mes-
sage will be displayed recommending
the use of a high temperature pro-
gramme after several low temperature
programmes have been run.
Heat accumulator
This dishwasher is equipped with a heat
accumulator (see “Caring for the envir-
onment – Heat accumulator”).
Empty manually
You can manually empty the heat accu-
mulator, e.g. for a longer period of ab-
sence, or before moving the dishwasher
to a new location.
Please ensure that the dishwasher is
properly connected.
Select the Empty manually menu op-
tion.
The process starts straight away.
To Next Page
