Miele G 7260 - Water Connection; Information; Showroom; Factory Default

Settings
37
Water connection
You can set your water connection type
and control the heat accumulator func-
tions.
 If you select Automatic, the dish-
washer detects which water connec-
tion is currently being used and auto-
matically selects the right setting.
 Select Cold water, if you have a cold
water connection and want to always
use the heat accumulator
 Select Warm water, if you have a hot
water connection and do not want to
use the heat accumulator
Information
You can display the following informa-
tion about your dishwasher:
- Operating hours (see also “Options –
Displaying the operating hours”)
- Programme sequences
- Total consumption
- Fault memory
- Data plate
- Software version
Showroom
For demonstration purposes only.
The dishwasher is equipped with a
demo mode for showroom use.
Factory default
You can reset all dishwasher settings to
the factory default settings.
 Select Reset and confirm with OK.