Miele G 7260 - Cleaning the Drain Pump

Cleaning and care
85
Cleaning the drain pump
If water remains in the wash cabinet
after the end of the programme, the wa-
ter has not been pumped away. The
drain pump may be blocked by foreign
objects. These foreign objects are easy
to remove.
 Disconnect the dishwasher from the
mains.
To do this, turn off the dishwasher,
switch off at the socket and unplug it.
 Take the filter combination out of the
wash cabinet (see “Cleaning and care
– Cleaning the filters”).
 Scoop the water out of the wash cab-
inet using a small container.
1
2
 Press the catch of the drain pump
cover inwards.
 Tip the cover inwards until it is re-
leased.
 Rinse the cover thoroughly under run-
ning water and remove all foreign ob-
jects.