Problem solving guide
89
Fault messages
Problem Cause and remedy
The optical in-operation
indicator light is flash-
ing quickly.
The alarm tone is
sounding.
One of the following
faults appears in the
display:
Before rectifying the problem:
Switch the dishwasher off.
Fault F There may be a technical fault.
Switch the dishwasher back on after a few
seconds.
Select the programme you want to use.
Close the door.
If the fault message appears again, there is a tech-
nical fault.
Switch the dishwasher off.
Close the stopcock.
Call the Miele Customer Service Department.
Waterproof The Waterproof system has reacted.
Switch the dishwasher off.
Close the stopcock.
Call the Miele Customer Service Department.
To Next Page
Loading...
