Problem solving
With the aid of the following guide, minor problems can be corrected without a
service call.
Any work required on the electrical components of the dishwasher should only
be performed by a qualified and trained person in accordance with local and
national regulations. Unauthorized repairs could be dangerous.
Problem Possible cause Remedy
The “Start” indicator
does not light after
pressing the “On/Off”
button.
The door is not closed
tightly.
Close the door com
-
pletely.
The machine is not
plugged in.
Insert the plug.
The circuit breaker is de
-
fective or has “tripped”.
Reset the circuit breaker.
The “Start” indicator
light is on, but the dish-
washer is not running.
The program selector is in
the “Stop” position.
– Turn the program
selector to the desired
program.
– Press the “Start”
button.
The dishwasher stops
during a program.
The circuit breaker has
tripped.
Reset the circuit breaker.
Problem solving
40
To Next Page
Loading...
