Increasing the water intake
time
To increase the water intake time, pro
-
ceed as follows:
^
Turn off the dishwasher using the
“On/Off” button.
^
Turn the program selector to “Stop”
^
Press the “Start” button while simulta
-
neously turning on the machine with
the “On/Off” button. Release the
“Start” button within 2 seconds.
The “Salt-PC” indicator should be
flashing.
Note:
If other indicator lights are flashing,
repeat the process.
Except:
If the rinse aid indicator lights the rinse
aid was never added or needs to be re-
filled. See “Adding rinse aid”.
^
Turn the program selector to
“Economy 55°C/130°F”.
–
If the “Start” indicator does not light,
the water intake time is set to normal.
–
If the “Start” indicator lights the ex
-
tended water intake time is set.
^
To change the setting, press the
“Start” button.
The “Start” indicator will light or go out
each time the button is pressed.
^
Turn the program selector to “Stop”.
^
Turn off the dishwasher with the
“On/Off” button.
The modified intake time is now stored.
Solving problems
49
To Next Page
Loading...
