Cleaning the control panel and
door front
,
Remove any soiling immediately.
If not, it might become impossible to
remove and could cause the outer
surface to alter or discolour.
^
The control panel should only be
wiped with a damp cloth.
^
Clean stainless steel surfaces using a
microfibre cloth or with a solution of
warm water and a little washing-up
liquid applied with a soft sponge.
Wipe the surfaces dry using a soft
cloth.
To avoid damaging the outer surface,
do not use:
–
cleaning agents containing soda,
ammonia, acids or chlorides
–
cleaning agents containing
descaling agents,
–
abrasive cleaning agents, e.g.
powder cleaners and cream
cleaners,
–
solvent-based cleaning agents,
–
stainless steel cleaners
–
dishwasher cleaner,
– oven sprays
– glass cleaning agents,
– hard, abrasive sponges and
brushes, e.g. pot scourers
– sharp metal scrapers
Cleaning and care
46
To Next Page
Loading...
