Miele G6360 - Flexitimer with Ecostart

Options
48
FlexiTimer with EcoStart
The FlexiTimer ȴ gives you three ways
of starting the program by means of de‐
laying the start. You can set the start
time or the finish time of a program.
You also have the option of taking ad‐
vantage of time variable economy rates
of electricity using the
(FR6WDUW function.
When using the delay start function,
make sure that the detergent com‐
partment is dry before adding deter‐
gent. Wipe dry with a cloth if neces‐
sary. If the compartment is wet,
powder detergent can become lum‐
py and stick to the dispenser, with
the result that it is not fully dis‐
pensed.
Do not use liquid detergent when se‐
lecting delay start, as it can run into
the dishwasher before it is required.
ĺ Open the door.
ĺ Switch the dishwasher on with the ɩ
button.
ĺ Select the desired program.
ĺ Press the ȴ button.
The ȴ indicator light will light up.
You can use the ҟҞ arrow buttons to
select the
6WDUWDW, )LQLVKDW, or (FR6WDUW
function or %DFN䭈.
ĺ Confirm selection of the function you
want with
OK.
The set time will appear and the hour
number block will be highlighted.
You can now enter the time you want
using the ҟҞ arrow buttons and con‐
firm with
OK.
If, while you are setting the time, you do
not press any buttons for several sec‐
onds, the display will revert to the previ‐
ous menu. You will then have to enter
your settings again.
If you open the door for more than
four seconds before the start time is
reached, the message
&RQWLQXHZLWK2.
appears in the display. Press the OK
button and close the door within four
seconds to restart the FlexiTimer.