Miele G6360 - Volume; Version Info; Showroom Program

Settings menu
61
Volume
A sequence of buzzer tones will sound
at the end of the program or if there is a
fault as long as the buzzer has been ac‐
tivated.
Buzzer in the event of a fault
The buzzer in the event of a fault will
sound four times at intervals with a
short pause between each set of tones.
The buzzer which sounds when there
is a fault cannot be deactivated.
Buzzer at the end of a program
The buzzer at the end of a program will
sound four times at intervals with a
short pause between each set of tones.
The volume of the buzzer which sounds
at the end of the program can be set to
one of seven stages. If no volume is se‐
lected, the buzzer is switched off.
ĺ Select the %X]]HUWRQH option.
ĺ Use the ҟҞ arrow buttons to set the
volume required and confirm your se‐
lection with the
OK button.
Keypad tone
An buzzer tone sounds each time a but‐
ton is pressed.
The volume of the keypad tone can be
set to one of seven stages. If no volume
is selected, the keypad tone is switched
off.
ĺ Use the ҟҞ arrow buttons to set the
volume required and confirm your se‐
lection with the
OK button.
Version info
You can call the electronic software ver‐
sion of your dishwasher for technical
support purposes.
ĺ Confirm the display with OK.
Showroom program
For demonstration purposes only.
The dishwasher is fitted with various
demonstration programs for showroom
use.
– 'HPRPRGH
Demonstration program for show‐
rooms.
– 'HPRZLWKVRXQG
This program activates the circulation
pump to demonstrate the sound of
the dishwasher.
– 'HPR'U\LQJ3OXV
The door will open automatically.
– %ULOOLDQW/LJKW
The interior lighting is on constantly.