Settings menu
60
Check filters
You can adjust the interval at which the
message to remind you to check the fil‐
ters appears.
You can set an interval between 30 and
60 program cycles.
The "Check filters" message is set at
the factory to appear after every 50 pro‐
gram cycles.
ĺ Select the interval you want and con‐
firm this with
OK.
Soak
You can use this function to loosen
dried-on food residues in the program
selected.
Once activated, this function will be
carried out with all programs until you
deactivate it.
If you are using powder dishwasher de‐
tergent, add approx. 5 g to compart‐
ment I.
ĺ Select the setting you want and con‐
firm with
OK.
Pre-Rinse
You can use this function to remove
easily loosened food residues in the
program selected.
Once activated, this function will be
carried out with all programs until you
deactivate it.
ĺ Select the setting you want and con‐
firm with
OK.
Brightness
There are seven different display bright‐
ness settings.
ĺ Select the brightness you want and
confirm this with
OK.
To Next Page
Loading...
