Cleaning and care
66
To clean the inside of the filter, the flap
must be opened:
ĺ Press catches Ȧ together in the di‐
rection of the arrows as shown, and
open the filter ȧ.
ĺ Rinse all the filters under running wa‐
ter.
ĺ Then close the flap so that the catch
engages.
ĺ Replace the filter system so that it
lies flat in the base of the wash cabi‐
net.
ĺ Then turn the handle clockwise until
both arrows point towards each oth‐
er. This will lock the filter system in
place.
ɋ Take care when you are fitting
the filter system that it is secured in
position correctly.
Otherwise coarse soil could get into
the circulation system and cause a
blockage.
To Next Page
Loading...
