Frequently Asked Questions
70
Problem Possible cause and solution
The Optical Interface is
flashing quickly.
The buzzer is sounding.
One of the following
faults appears in the
display:
Before fixing the fault:
ĺ Turn the dishwasher off with the ɩ button.
ɋ )
There may be a technical fault.
After a few seconds:
ĺ Turn the dishwasher back on.
ĺ Select the desired program.
ĺ Close the door.
If the error message is displayed again, there is a
technical fault.
ĺ Contact Miele Service.
ɫ
The WaterProof System has reacted.
ĺ Turn off the water supply.
ĺ Contact Miele Service.
ɋ
A fault has occurred in the circulation pump.
ĺ Turn the dishwasher off for at least 30 seconds
with the ɩ button.
ĺ Turn the dishwasher back on.
ĺ Select the desired program.
ĺ Close the door.
If the error message is displayed again, there is a
technical fault.
ĺ Contact Miele Service.