Operation
42
Basic operation
Place the food in the oven.
Select the required oven function with
the function selector.
The oven function is displayed briefly
and then the recommended
temperature will appear.
Change the recommended
temperature with the rotary
selector, if necessary.
Otherwise the recommended
temperature will be accepted within a
few seconds. You can change the
temperature subsequently via the
rotary selector.
Confirm with OK.
The current temperature will appear and
the heating-up phase will begin.
You will see the temperature rising in
the display. A buzzer will sound when
the selected temperature is reached for
the first time.
When the cooking programme is
finished, turn the function selector
to0.
Take the food out of the oven.
Changing values and settings
for a cooking programme
Depending on the function, as soon as
a cooking programme is in progress,
you can change the values or settings
for this programme.
Depending on the function, you can
change the following settings:
- Temperature
- Duration
- Finish at
- Start at
Changing the temperature
You can permanently reset the
recommended temperature to suit
your cooking preferences via the|
Recommended temps sensor.
Change the temperature using the
rotary selector.
The temperature changes in 5°C steps.
Confirm with OK.
Useful tip: If you have programmed a
cooking duration, you first have to quit
the “Cooking duration” menu by
touching the sensor. You can then
change the temperature using the rotary
selector.
Then touch the sensor to display the
cooking duration again.