Cleaning and care
63
To delay the start time of the pyro-
lytic cleaning programme
Start the pyrolytic cleaning programme
as described and delay the end time
within the first five minutes.
Confirm with OK.
Press continuously until flashes.
The end time, calculated from the cur-
rent time of day plus the duration of the
pyrolytic cleaning programme selected,
will appear in the display.
Confirm with OK.
The hours will flash.
Set the hours using .
Confirm with OK.
The minutes will flash.
Use to set the minutes.
Confirm with OK.
The end time set is now saved.
The oven heating switches off.
The end time can be changed at any
time up to the start of the programme.
As soon as the start time has been
reached, the oven heating, lighting and
cooling fan will switch on and the dura-
tion will appear in the display.
At the end of pyrolytic cleaning
First , and appear.
As long as lights up, the door is
locked. When flashes, the door is un-
locked.
When the door lock is released:
– goes out.
– will flash.
– A buzzer will sound if switched on
(see “Clock/timer - Changing set-
tings”).
Turn the function selector to0.
The visual and acoustic signals will
switch off.
Risk of injury caused by hot sur-
faces.
At the end of the pyrolytic cleaning
programme, the oven will still be very
hot. You could burn yourself on the
heating elements and oven compart-
ment.
Allow the heating elements and the
oven compartment temperature to
drop to a safe level before removing
any residues.
Clean the oven compartment to re-
move any pyrolytic residues (e.g. ash)
that may have built up depending on
the degree of soiling in the oven.
To Next Page
Loading...
Need help?
General
