Oven setting Settings available (* factory default)
P I Clock display S 0 * The clock display is switched off.
The time of day display is switched off when
the programme selector is turned to the "0"
position. The time of day continues to run in the
background.
It reappears when the programme selector is
turned to one of the functions.
S I The clock display has been activated.
The time is always visible, even when the
programme selector is at "0".
P 2 Buzzer S 0 A buzzer does not sound after the set times
have elapsed.
S I
S 2
S 3 *
A buzzer sounds after the set times have
elapsed.
There are three buzzer tones to choose from.
Turn the multi-function selector to hear to the
different tones.
P 3 Buzzer duration S 0 * At the end of a set time five short beeps
sound and are repeated every five minutes.
This reminder continues for up to an hour.
S I A continual beep sounds after a set time has
elapsed.
P 4 System lock /
Safety lock
S 0 * This function is not activated. The appliance is
not secured against unintentional switching on
and programmes can be altered.
S I This function is activated. The appliance is
secured against unintentional switching on and
programmes cannot be altered.
See the relevant chapters in this booklet for
instructions on how to activate these safety
features.
Altering oven settings v
42
To Next Page
Loading...
Need help?
General